ADD A Battery Dual Circuit System

 

Product Description

Simultaneously switches two isolated battery banks or combines battery banks to all loads

  • Make-before-break contact design allows switching between battery banks without power interruption
  • Ignition protected—safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Meets American Boat and Yacht Council (ABYC) requirements for battery switches

SPECIFICATIONS

Cranking Rating: 10 sec. 1,000 Amps
Cranking Rating: 1 min. 750 Amps
Intermittent Rating: 5 min. 525 Amps
Continuous Rating 350 Amps
Maximum Voltage Rating 32 Volts DC
Terminal Stud Size 3/8"-16 (M10)
Terminal Stud Torque 140 in-lb (15.82 N·m) max.
Mounting Holes Accept 1/4" (M6) Screw
Cable Size to Meet Ratings 4/0 AWG (120mm²)
Cable Clearance For 4/0 AWG Cables 1.10" (27.9mm)
Weight Lb (Kg) 1.16 (0.53)

CERTIFICATIONS & AGENCY STANDARDS

  •  Marked
  • UL Listed - UL 1107 electric power switches
  • Meets American Boat and Yacht Council (ABYC) requirements
  • Meets UL 1500 and SAE J1171 external ignition protection requirements
  • Waterproof rated IP66—protected against powerful water jets
  • Protects sensitive electronics by temporary isolation of house loads from engine circuit during engine cranking
  • Designed for 12 or 24 volt systems
  • 12/24 volt auto ranging voltage input
  • Hermetically sealed contacts/vaporproof
  • Waterproof rated IP67—temporary immersion for 30 minutes
  • Ignition protected—safe for installation aboard gasoline powered boats
  • Remote LED output indicates relay state away from ACR
  • Supports high-output alternators up to 120 Amperes
  • Dual sensing

SPECIFICATIONS

Intermittent Rating: 5 min. 210 Amps
Continuous Rating 120 Amps
Nominal Voltage 12/24 Volts DC
Amperage Operating Current - continuous 15mA open
175mA combined
Terminal Stud Size 3/8"-16 (M10)
Terminal Stud Length 1.50" (38.1 mm)
Terminal Stud Torque 140 in-lb (15.5 Nm)
Cable Size to Meet Ratings 1/0 AWG
Terminal Ring Diameter Clearance 1.12" (28.4 mm)
Mounting #8 or M4
Relay Contact Position
Combine (30 sec.) 13.6V @ 12V DC
27.2V @ 24V DC
Combine (90 sec.) 13.0 V @ 12V DC
26.0V @ 24V DC
Open (10 sec.) 12.35V @ 12V DC
24.7V @ 24V DC
Open (30 sec.) 12.75V @ 12V DC
25.5V @ 24V DC
Open High 16.0V @ 12V DC
30V @ 24V DC
Under Voltage Lockout 9.5V @12V DC 
19V @ 24V DC

CERTIFICATIONS & AGENCY STANDARDS

  •  Marked
  • Meets ISO 8846, ignition protection, and UL 1500 and SAE J1171 external ignition protection requirements

BoatToys.ca is an Upfront Merchant on TheFind. Click for info.