Jabsco Wakeboard Ballast Puppy Pump (75lbs/minute)

 

Product Description

Without a doubt, the Jabsco Ballast Puppy is the most popular wakeboard ballast pump in history. Its success is for good reason; the reversible design simplifies installation and reduces the number of components required, and its track record proves it's a reliable performer that is fast and efficient. It has a fill rate of about 75 pounds per minute, so it can fill most ballast tanks in about five minutes. 

The integrated Run-Dry Protection circuit monitors the current draw of the pump and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature prevents damage to the impeller.

The ignition protected design makes this pump suitable for installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. This feature alone is crucial for safe operation and is one important distinguishing factor between the Ballast Puppy and the Simer pump to which it is often compared.

With more manufacturers, including Centurion, Mastercraft, Moomba, Nautique and Supra, installing the Jabsco Ballast Puppy than any other ballast pump available, it's obvious this is a great choice for your fully automated ballast system. 

If for any reason you need to replace a Jabsco ballast pump that came pre-installed in your boat, the pump we sell is the latest version and is a direct replacement for all previous models. The part number may vary slightly, but this is identical to any pump that begins with 18220, the only difference is the four digit suffix which indicates and OEM application, even though functionally the pump is exactly the same.

 

Specifications

  • Fill Rate: This pump fills and drains at a rate of 75 pounds/min
  • Physical Dimensions: 8"L x 3.625"W x 4.75"H
  • Flow Rate: 540 Gallons Per Hour / 9 Gallons Per Minute
  • Inlet/Outlet: 1" Hose Barb and 1/2" NPT Internal Thread
  • Voltage/Max Current Draw: 12 Volt DC, 11.5 Amps 
  • Self-priming: Yes
  • Impeller Color: Green
  • Model: 18220-1127

Features

  • Fills an 800 pound bag in approximately 10 minutes and 30 seconds
  • Includes a pre-wired rocker switch to simplify hookup, just run a power connection to the dash, and from the switch to the pump
  • Component reversible pump for automated ballast system
  • Ignition Protected: Designed for safe installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. This feature alone is crucial for safe operation, and is one important distinguishing factor between the Ballast Puppy and the similar pump to which it is often compared.
  • The integrated Thermal Damage Protection circuit monitors the temperature of the pump motor and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature will prevent damage to the motor from overheating.
BoatToys.ca is an Upfront Merchant on TheFind. Click for info.